Single Floor Prefabricated Modular House

1-External and internal wall panels: A-Internal and external walls: Is double sided cemented chipboard in dimension of 8 X 1250X 2500 mm.
B-For heat insulation hard polystyrene foam in 40 mm thickness is used.
C-Heat conducting coefficient is: K: 0.64 kcal/ m 2 hc.

2-Wall combinationA-Special U and H profiles of combination elements are bent from DKP sheet material and combined with special clamping system. As radius forms at sides, no corrosion is resulted at sides due to transpiration.

3- DoorsA-External doors are made from steel joinery and in the dimension of 80 X 200 cm.
B-Internal doors are in the dimension of 80 200. The internal doors are with metal chassis and the wings are double sided mdf press coating.
C-At external doors, cylindrical internal door built in locks will be installed. The lock type is KALE.

4-Windows: A-They are Special formed steel joinery and in the dimension of 100 X 120 and of FIRAT brand.
B-Transom windows are PVC joinery and in the dimension of 40 X 60.
C-Windows are 4+9+ 4 mm insulating glass.

5- Structural construction: A-The roof girder is manufactured from box profile and special profile of DKP sheet metal. Along the building, there is a steel girder at every 125 cm.
B- The steel columns are special profile manufactured from DKP sheet metal.
C- Purloins are 5*5 mm wooden.
D-The sleepers can be removed and installed many times with nut and bolt.

6-Ceiling coating and insulation: A-For ceiling coating, plaster boards in thickness of 12.5 mm are used.
B-The insulation of the ceiling is established with fiber glass in 80 mm thickness.
C-The ceiling combination is made from pressing by bending from the welded DKP sheet metal material under the roof girders. As radius forms at sides of sheet metal, no corrosion is resulted at sides due to transpiration.
D-Plaster board combination elements are manufactured from electro static painted aluminum material.
E-Ceiling heat conduction coefficient K is: 0.49 kcal/ m 2 hc.